Amplifiers | Outdoor Speaker Depot (2024)

Amplifiers | Outdoor Speaker Depot (1)

Amplifiers

Behind the scenes of any killer audio system is an amplifier or pre-amp that supplies the perfect balance of clean and reliable power. While we advise purchasing the best speakers you can afford to pair with an Outdoor Speaker Depot amplifier; we also know that good power goes a long way in enhancing sound, whether it be in a dedicated home theater, high-end listening room, or 70V commercial application where power supplies are stretched to the max. For outdoor applications, Outdoor Speaker Depot mono subwoofer amplifiers allow you to design a system that overcomes ambient noises like traffic and wind, so sound comes through clearly and robustly. Every electrical component is carefully orchestrated in every one of our amplifiers, and we invest in Class D technology that runs cooler, more efficiently, and is more ecofriendly than traditional A/B amps. An amp should look as good as it sounds, which is why Outdoor Speaker Depot amps are slim-fitting with front panel indicators that are drop-dead stunning on shelves or racks.

NEW$649.99Compare at: $974.99You Save: $3254 Zone Amplifier 8Ch x 80W, Class D, Front Panel On/Off Buttons, Distributed Audio MX880 GEN2
NEW$799.99Compare at: $1199.99You Save: $4006 Zone Amplifier 12Ch x 80W, Class D, Front Panel On/Off Buttons, Distributed Audio MX1280 GEN2
NEW$999.99Compare at: $1499.99You Save: $5008 Zone Amplifier 16Ch x 80W, Class D, Front Panel On/Off Buttons, Distributed Audio MX1680 GEN2
NEW$249.99Compare at: $549.99You Save: $300OSD DAC-X200 200W RMS 2 Channel Class D Stereo Amplifier 24/192 USB DAC
$199.99Compare at: $299.99You Save: $100OSD 100W RMS 2 Channel Class AB Power Amplifier with 24/192 Hi-Res USB DAC, DAC-XA100
$688.99Compare at: $1033.49You Save: $344.5OSD Nero Max8 4 Zone App Control Matrix Multi Room Amplifier 80W/Zone, iOS and Android
$899.99Compare at: $1648.99You Save: $749OSD Nero App Control Amplifier 80W x 6 Zones Multi Room iOS Android 6x Source Matrix
$499.99Compare at: $749.99You Save: $250OSD Nero Control12: 6-Zone App-Controlled Matrix, Multi-Room Audio, Expandable to 18 Rooms
$1199.99Compare at: $1278.99You Save: $79Nero Control12 6-Zone App-Controlled Matrix + MX1280 12-Channel 80W/ Channel Power Amplifier Bundle
$699Compare at: $1099.99You Save: $400.996 Zone 12-Channel 80W/ Channel Class D Digital Power Amplifier for Home Theater Systems - MX1280
$399Compare at: $598.99You Save: $199.99OSD Nero Stream 240W App Control Amplifier, Compact Design, Built-In DAC, WiFi Streaming, Bluetooth
$299.99Compare at: $449.99You Save: $150OSD Nero Stream Outdoor Amplifier Wi-Fi, Bluetooth, App Control IP64 Class D (100W x 2)

  • Call Us:
  • 888-779-4968
  • Email:
  • support@osdaudio.com
  • Questions:
  • FAQs


© 2003-2024 OSD Audio. All Rights Reserved.

';var loadinghtml_myFacetResults = '

Amplifiers | Outdoor Speaker Depot (18)

';var loadinghtml_myFacetRefinery = '';/* GD Set the area to scroll to the results. GDCP */window.GDFacetsScrollToResults = function () {setTimeout(function () {if(window.innerWidth >= 960) {/* Desktop. Keep in mind sticky header */$("html, body").animate({ scrollTop: $("main").offset().top }, 600);} else {/* Mobile and no sticky header */$("html, body").animate({ scrollTop: $(".x-collapsing-breadcrumbs").offset().top }, 600);}}, 150);}/* GD We need to now trigger all the theme scripts that do lazy loading and other crazy fun stuff. GDCP */window.GDFacetsAfterDataLoaded = function (what_to_do) {if(what_to_do=='full_from_back_button') {//elementsUI.site();elementsUI.pages.common();//themeFunctionality.init();themeFunctionality.sharedFunctions.observeDeferred();//themeFunctionality.jsCTGY();try {window.init_custom_selects('ajax_reload');}catch(err) {/* console.log("Check init_custom_selects."); */}} else {elementsUI.pages.common();themeFunctionality.sharedFunctions.observeDeferred();themeFunctionality.jsCTGY();window.init_custom_selects('ajax_reload');}gdRangeFinderFixes();}/* GD GDFacetsReloadFromPrev reloads the facet areas using previous data saved in the #js-GDfacetMemory form */window.GDFacetsReloadFromPrev = function () {/* Get saved JSON data from the 3 form inputs in the #js-GDfacetMemory form */var remember_myFacetSort = $("#js-remember_myFacetSort").val();var remember_myFacetTree = $("#js-remember_myFacetTree").val();var remember_myFacetResults = $("#js-remember_myFacetResults").val();var remember_myFacetRefinery = $("#js-remember_myFacetRefinery").val();var updated_at_least_one = false;/* Use saved data to populate the multiple facet areas. */if(remember_myFacetSort != '') {$("#myFacetSort").html(loadinghtml_myFacetSort);$("#myFacetSort").html(remember_myFacetSort);updated_at_least_one = true;} else {/* console.log("Nothing in remember_myFacetSort to reload."); */}if(remember_myFacetTree != '') {$("#myFacetTree").html(loadinghtml_myFacetTree);$("#myFacetTree").html(remember_myFacetTree);updated_at_least_one = true;} else {/* console.log("Nothing in remember_myFacetTree to reload."); */}if(remember_myFacetResults != '') {$("#myFacetResults").html(loadinghtml_myFacetResults);$("#myFacetResults").html(remember_myFacetResults);updated_at_least_one = true;} else {/* console.log("Nothing in remember_myFacetResults to reload."); */} if(remember_myFacetRefinery != '') {$("#myFacetRefinery").html(loadinghtml_myFacetRefinery);$("#myFacetRefinery").html(remember_myFacetRefinery);updated_at_least_one = true;} else {/* console.log("Nothing in remember_myFacetRefinery to reload."); */} if(updated_at_least_one) {/* GD Now Reinit any Theme JS functions. */GDFacetsAfterDataLoaded('full_from_back_button');/* GD Now scroll the user to the new content. */GDFacetsScrollToResults();}/* console.log("GDFacetsReloadFromPrev() Finished."); */}/* GD Override Function MMProdList_UpdateQuery_SubmitParameters from clientside.mvc?Filename=runtime_ui.js */window.MMProdList_UpdateQuery_SubmitParameters = function ( form, params, gdversion ){/* console.log("GD Override OK: MMProdList_UpdateQuery_SubmitParameters"); */var i, j, i_len, j_len, elements, params_output_array;/* We don't want this mmprodlist_updatequery_submitparameters_submitted var to kill the function because we're reusing it now. GDCP *//*if ( window.mmprodlist_updatequery_submitparameters_submitted ){return;}window.mmprodlist_updatequery_submitparameters_submitted = true;*/params_output_array = new Array();params.sort( function( a, b ) { return sortAlphaNumeric( a.name, b.name, true ); } );for ( i = 0, i_len = params.length; i < i_len; i++ ){for ( j = 0, j_len = params[ i ].values.length; j < j_len; j++ ){if ( params[ i ].values[ j ].length ){params_output_array.push( encodeURIComponent( params[ i ].name ) + '=' + encodeURIComponent( params[ i ].values[ j ] ) );}}}/* GD: Append the JSON View to the params array. Force the view to be JSON output. GDCP */params_output_array.push( 'view=json' );params_output_array.push( 'killcache2=' + new Date().getTime());/* We're not setting these listeners anymore. They cause a "hickup" with the overrides we do. GDCP */ /*if ( window.mmprodlist_updatequery_submitparameters_timeout ){clearTimeout( window.mmprodlist_updatequery_submitparameters_timeout );delete window.mmprodlist_updatequery_submitparameters_timeout;}if ( window.mmprodlist_updatequery_submitparameters_timeout_event_attached ){elements = form.getElementsByTagName( '*' );for ( i = 0, i_len = elements.length; i < i_len; i++ ){RemoveEvent( elements[ i ], 'mousedown', window.mmprodlist_updatequery_submitparameters_timeout_event_function );RemoveEvent( elements[ i ], 'mousemove', window.mmprodlist_updatequery_submitparameters_timeout_event_function );RemoveEvent( elements[ i ], 'mouseup', window.mmprodlist_updatequery_submitparameters_timeout_event_function );}}*//* GD NOT SENDING TO NEW WINDOW!window.location.href = [ window.location.protocol, '//', window.location.host, window.location.pathname ].join( '' ) + ( params_output_array.length ? ( '?' + params_output_array.join( '&' ) ) : '' );*//* GD: Set the URL of the page to get the JSON data. */var GDfacets_DataURL = [ window.location.protocol, '//', window.location.host, window.location.pathname ].join( '' ) + ( params_output_array.length ? ( '?' + params_output_array.join( '&' ) ) : '' );/* console.log("GDfacets_DataURL: "+GDfacets_DataURL); *//* GD Populate the areas with something while we load new data. */$("#myFacetResults").html(loadinghtml_myFacetResults);/*$("#myFacetSort").html(loadinghtml_myFacetSort);*//*$("#myFacetTree").html(loadinghtml_myFacetTree);*//*$("#myFacetRefinery").html(loadinghtml_myFacetRefinery);*//* GD Ajax Post to the page so we can get the JSON data back and load the various sections all at once with new data. */$.post(GDfacets_DataURL,function(json_data) { })/*for success*/.done(function(json_data) {/* GD Now scroll the user to the new content. */if(json_data.products_on_page_count > 0) {/* GD Load the various sections all at once with new HTML. */$("#myFacetSort").html(json_data.new_myFacetSort);$("#myFacetTree").html(json_data.new_myFacetTree);$("#myFacetResults").html(json_data.new_myFacetResults);$("#myFacetRefinery").html(json_data.new_myFacetRefinery);/* GD Save the new HTML to the remember form fields. */$("#js-remember_myFacetSort").val(json_data.new_myFacetSort);$("#js-remember_myFacetTree").val(json_data.new_myFacetTree);$("#js-remember_myFacetResults").val(json_data.new_myFacetResults);$("#js-remember_myFacetRefinery").val(json_data.new_myFacetRefinery);$("#js-remember_products_found").val(json_data.products_on_page_count);/* GD Now Reinit any Theme JS functions. */GDFacetsAfterDataLoaded();/* Scroll to results */GDFacetsScrollToResults();} else {/* There are no valid results. */$("#myFacetResults").html('

Sorry, no results match these filters.

Undo the last filter or RESET.

');}})/*for failed*/.fail(function(json_data) {/* console.log( "error reloading avail facets to "+doAjaxFacetURL ); */})/*for completion, whether success or error*/.always(function(json_data) {}); }/* GD Override Function MMProdList_UpdateQuery_SubmitParameters_Timeout from clientside.mvc?Filename=runtime_ui.js*/window.MMProdList_UpdateQuery_SubmitParameters_Timeout = function ( form, submit_delay, gdversion ){/* console.log("GD Override OK: MMProdList_UpdateQuery_SubmitParameters_Timeout"); */var i, i_len, elements;submit_delay = stoi_def_nonneg( submit_delay, 0 )if ( window.mmprodlist_updatequery_submitparameters_timeout ){clearTimeout( window.mmprodlist_updatequery_submitparameters_timeout );delete window.mmprodlist_updatequery_submitparameters_timeout;}if ( submit_delay === 0 ){return MMProdList_UpdateQuery_SubmitParameters_LowLevel( form );}window.mmprodlist_updatequery_submitparameters_timeout = setTimeout( function() { MMProdList_UpdateQuery_SubmitParameters_LowLevel( form ); }, submit_delay );if ( !window.mmprodlist_updatequery_submitparameters_timeout_event_attached ){window.mmprodlist_updatequery_submitparameters_timeout_event_attached = true;window.mmprodlist_updatequery_submitparameters_timeout_event_function = function( event ) { MMProdList_UpdateQuery_SubmitParameters_Timeout( form, submit_delay ); };/* We're not setting these listeners anymore. They cause a "hickup" with the overrides we do. GDCP *//*elements = form.getElementsByTagName( '*' );for ( i = 0, i_len = elements.length; i < i_len; i++ ){AddEvent( elements[ i ], 'mousedown', window.mmprodlist_updatequery_submitparameters_timeout_event_function );AddEvent( elements[ i ], 'mousemove', window.mmprodlist_updatequery_submitparameters_timeout_event_function );AddEvent( elements[ i ], 'mouseup', window.mmprodlist_updatequery_submitparameters_timeout_event_function );}*/}}/* GD Override Function MMProdList_UpdateQuery_Notify_Updating from clientside.mvc?Filename=runtime_ui.js*/ window.MMProdList_UpdateQuery_Notify_Updating = function ( form, gdversion ){/* console.log("GD Override OK: MMProdList_UpdateQuery_Notify_Updating"); */var i, i_len;/* We're not disabling the facet fields anymore. We can if needed. It's not required. GDCP *//*for ( i = 0, i_len = form.elements.length; i < i_len; i++ ){form.elements[ i ].setAttribute( 'disabled', 'disabled' );}*/}});}

Amplifiers | Outdoor Speaker Depot (2024)

References

Top Articles
Latest Posts
Article information

Author: Rubie Ullrich

Last Updated:

Views: 6042

Rating: 4.1 / 5 (72 voted)

Reviews: 95% of readers found this page helpful

Author information

Name: Rubie Ullrich

Birthday: 1998-02-02

Address: 743 Stoltenberg Center, Genovevaville, NJ 59925-3119

Phone: +2202978377583

Job: Administration Engineer

Hobby: Surfing, Sailing, Listening to music, Web surfing, Kitesurfing, Geocaching, Backpacking

Introduction: My name is Rubie Ullrich, I am a enthusiastic, perfect, tender, vivacious, talented, famous, delightful person who loves writing and wants to share my knowledge and understanding with you.